Advanced MEMS Packaging

Chapter 1 Introduction to MEMS 1.1 Introduction 1.2 Commercial Applications of MEMS 1.3 MEMS Markets 1.4 Top 30 MEMS Suppliers 1.5 Introduction to MEMS Packaging 1.6 MEMS Packaging Patents Since 2001 1.6.1 US MEMS Packaging Patents 1.6.2 Japan MEMS Packaging Patents 1.6.3 Worldwide MEMS Packaging Patents 1.7 References Chapter 2 Advanced MEMS Packaging 2.1 Introduction 2.2 Advanced IC Packaging 2.2.1 Moore's Law vs. More Than Moore 2.2.2 3D IC Integration and WLP 2.2.3 Low-Cost Solder Microbumps for 3D IC SiP 2.2.4 Thermal Management of 3D IC SiP with TSV 2.3 Advanced MEMS Packaging 2.3.1 3D MEMS WLP - Designs and Materials 2.3.2 3D MEMS WLP - Processes 2.4 References Chapter 3 Enabling Technologies for Advanced MEMS Packaging 3.1 Introduction 3.2 TSV for MEMS Packaging 3.2.1 Via formations 3.2.2 Dielectric Isolation Layer (SiO2) Deposition 3.2.3 Barrier/Adhesion and Seed Metal Layer Deposition 3.2.4 Via Filling 3.2.5 Cu polishing by Chemical/Mechanical polish (CMP) 3.2.6 Fabrication of ASIC Wafer with TSV 3.2.7 Fabrication of Cap Wafer with TSV and Cavity 3.3 Piezoresistive Stress Sensors for MEMS Packaging 3.3.1 Design and Fabrication of Piezoresistive Stress Sensors 3.3.2 Calibration of Stress Sensors 3.3.3 Stresses in Wafers After Mounting on a Dicing Tape 3.3.4 Stresses in Wafers After Thinning (Back-Grinding) 3.4 MEMS Wafer Thinning and Thin-Wafer Handling 3.4.1 3M Wafer Support System 3.4.2 EV Group's Temporary Bonding and DeBonding System 3.4.3 A Simple Support-Wafer Method for Thin Wafer Handling 3.5 Low-Temperature Bonding for MEMS Packaging 3.5.1 How Does Low Temperature Bonding with Solders Work? 3.5.2 Low Temperature C2C Bonding 2.5.3 Low Temperature C2W Bonding 2.5.4 Low Temperature W2W Bonding 3.6 MEMS Wafer Dicing 3.6.1 Fundamentals of Stealth Dicing (SD) Technology 3.6.2 Dicing of SOI Wafers 3.6.3 Dicing of Silicon-on-Silicon Wafers 3.6.4 Dicing of Silicon-on-Glass Wafers 3.7 RoHS Compliant MEMS Packaging 3.7.1 EU RoHS 3.7.2 What is the Definition of X-free, e.g., Pb-free? 3.7.3 What is a Homogeneous Material? 3.7.4 What is the TAC? 3.7.5 How a Law is Published in EU RoHS? 3.7.6 EU RoHS Exemptions 3.7.7 Current Status of RoHS Compliance in the Electronics Industry 3.7.8 Lead-Free Solder Joint Reliability of MEMS Packages 3.8 References Chapter 4 Advanced MEMS Wafer Level Packaging 4.1 Introduction 4.2 Micromachining, Wafer Bonding Technologies and Interconnects 4.2.1 Thin Film Technologies 4.2.2 Bulk Micromachining Technologies 4.2.3 Conventional Wafer Bonding Technologies for Packaging 4.2.4 Plasma Assisted Wafer Bonding Technology 4.2.5 Electrical Interconnects 4.2.6 Solder Based Intermediate Layer Wafer Bonding Technology 4. 3 Wafer Level Encapsulation 4.3.1 High Temperature Encapsulation Process 4.3.2 Low Temperature Encapsulation Process 4. 4 Wafer Level Chip Capping and MCM Technologies 4. 5 Wafer Level MEMS Packaging Based on Low Temperature Solders - Case Study 4.5.1 Case study - In/Ag system of non-eutectic composition 4.5.2 Case study - Eutectic InSn solder for Cu/Ni/Au based metallization 4.6 Summary and Future Outlooks 4.7 References Chapter 5 Optical MEMS Packaging - Communications 5.1 Introduction 5.2 Actuation Mechanisms and Integrated Micromachining Processes 5.2.1 Electrostatic Actuation 5.2.2 Thermal Actuation 5.2.3 Magnetic Actuation 5.2.4 Piezoelectric Actuation 5.2.5 Integrated Micromachining Processes 5.3 Optical Switches 5.3.1 Small Scale Optical Switches 5.3.2 Large Scale Optical Switches 5.4 Variable Optical Attenuators 5.4.1 Early Development Works 5.4.2 Surface Micromachined VOAs 5.4.3 DRIE Derived Planar VOAs Using Electrostatic Actuators 5.4.4 DRIE Derived Planar VOAs Using Electrothermal (Thermal) Actuators 5.4.5 3-D VOAs 5.4.6 VOAs Using Various Mechanisms 5.5 Packaging, Testing and Reliability Issues 5.5.1 Manufacturability and Self-assembly 5.5.2 Case Study - VOAs 5.5.3 Case Study - Optical Switches 5.6 Summary and Future Outlooks 5.7 References Chapter 6 Optical MEMS Packaging - Bubble Switch 6.1 Introduction 6.2 3D Optical MEMS Packaging 6.3 Boundary Value Problem 6.3.1 Geometry 6.3.2 Materials 6.3.3 Loading Conditions 6.4 Nonlinear Analyses of the 3D Photonic Switch 6.4.1 Creep Hysteresis Loops 6.4.2 Deflections 6.4.3 Shear Stress Time-History 6.4.4 Shear Creep Strain Time-History 6.4.5 Creep Strain Energy Density Range 6.5 Isothermal Fatigue Tests and Results 6.5.1 Sample Preparation 6.5.2 Test Set-Up and Procedures 6.5.3 Test Results 6.6 Thermal-Fatigue Life Prediction of the Sealing Ring 6.7 Summary 6.8 Appendix A: Package Deflection by Twyman-Green Interferometry Method 6.9.1 Sample Preparation 6.9.2 Test Setup and Procedure 6.9.3 Temperature Conditions 6.9.4 Measurement Results 6.9 Appendix B: Package Deflection by Finite Element Method 6.10 Appendix C: Finite Element Modeling of the Bolt 6.11.1 Description of Bolted Model 6.11.2 Responses of Bolted Photonic Switch 6.11 References Chapter 7 Bolometer MEMS Packaging 7.1 Introduction 7.2 Bolometer chip 7.3 Thermal optimization 7.3.1 Final temperature stability testing 7.4 Structural optimization of package 7.5 Vacuum packaging of Bolometer 7.5.1 Ge Window 7.6 Getter attachment and activation 7.7 Outgassing study in a Vacuum package 7.8 Testing set up for Bolometer 7.9 Image testing 7.10 References Chapter 8: Bio MEMS Packaging 8.1 Introduction 8.2 BioMEMS chip 8.3 Micro fluidic components 8.3.1 Micro fluidic cartridge 8.3.2 Biocompatible polymeric materials 8.4 Microfluidic Packaging 8.4.1 Polymer microfabrication techniques 8.4.2 Replication technologies 8.4.3 Overview of existing DNA and RNA extractor bio-cartridges 8.5 Fabrication of PDMS layers 8.6 Assembly of PDMS microfluidic packages 8.6.1 Microfluidic package with out reservoirs 8.6.2 Development of Reservoir and Valve 8.7 Self contained Micro fluidic cartridge 8.7.1 Micro fluidic package with self contained reservoirs 8.7.2 Reservoir design for controlled fluid flow 8.7.3 Pin valve design 8.7.4 Fluid Flow control Mechanism 8.8 Fabrication 8.8.1. Substrate fabrication 8.8.2. Material selection for the reservoir membrane 8.9 Permeability of material 8.10 Thermo Compression Bonding 8.10.1 Bonding of PMMA to PMMA for Channel layer 8.10.2 Polypropylene to PMMA for Reservoir and channel layer 8.10.3 Tensile Test 8.11 Microfluidic Package Testing 8.11.1 Fluidic testing 8.11.2 Biological Testing on bio-sample 8.12 Sample Preparation and Set Up 8.12.1 Pre treatment of the cartridge 8.12.2 DNA Extraction 8.12.3 PCR amplification 8.13 References Chapter 9 Bio Sensor MEMS Packaging 9.1 Introduction 9.1.1 Review of Optical Coherence Tomography 9.2 Biosensor packaging 9.2.1 Upper Substrate 9.2.2 Single Mode Optical Fiber and Graded Index Lens 9.2.3 Lower Substrate 9.2.4 Micro Mirror 9.3 The Package 9.3.1 The Configuration of the Probe 9.3.2 Optical Properties and Theories 9.3.3 Evaluations of Parameters 9.4 Optical Simulation 9.4.1 Optical model of the Probe 9.4.2 Effect of Mirror Curvature to Coupling Efficiency 9.4.3 Effect of Lateral Tilt in Flat Micro Mirror on a Curved Sample 9.4.4 Effect of Vertical Tilt in Flat Micro Mirror on a Curved Sample 9.4.5 Effect of Vertical Tilt in Flat Micro Mirror on a Flat Sample 9.5 Assembly of Optical probe 9.5.1 Fabrication of SiOB 9.5.2 Probe Assembly 9.5.3 Probe Housing 9.6 Testing of the Probe 9.6.1 Optical Alignment 9.6.2Axial Scanning Test Result 9.6.3 Probe imaging 9.6.4 Optical Efficiency Testing 9.7 References Chapter 10 Accelerometer MEMS Packaging 10.1 Introduction 10.2 Wafer level package requirements 10.2.1 Electrical modeling 10.2.2 Package structure 10.2.3 Extraction methodology of the interconnection characteristics 10.3 Wafer level packaging Process 10.4 Wafer Separation Process 10.4.1 Process Integration 10.5 Sacrificial wafer removal process 10.6 Wafer level vacuum sealing 10.7 Vacuum measurement using MEMS motion analyzer (MMA) 10.8 Reliability Testing - Vacuum maintenance 10.9 Wafer level 3D package for Accelerometer 10.10 References Chapter 11 RF MEMS Switches 11.1 Introduction 11.2 Design of RF MEMS Switches 11.2.1Electromagnetic modelling of capacitive switches 11.2.2Electromagnetic modelling of metal-contact switches 11.2.3Mechanical design of RF MEMS switches 11.3 Fabrication of RF MEMS Switches 11.3.1Surface micromachining of RF MEMS switches 11.3.2Bulk micromachining of RF MEMS switches 11.4 Characterization of RF MEMS switches 11.4.1RF performance 11.4.2Mechanical performance 11.5 Reliability of RF MEMS Switch 11.5.1Reliability of capacitive switches 11.5.2Reliability of metal-contact switches 11.6 Power Handling of RF MEMS Switches 11.6.1Power handling of capacitive switches 11.6.2Power handling of metal-contact switches 11.7 Summary 11.8 References Chapter 12 RF MEMS Tunable Circuits 12.1 Introduction 12.2 RF MEMS Tunable Capacitors 12.2.1Analog tuning of RF MEMS capacitors 12.2.2Digital tuning of RF MEMS capacitors 12.3 RF MEMS Tunable Band-Pass Filters 12.3.1Analog tuning of RF MEMS band-pass filters 12.3.2Digital tuning of RF MEMS band-pass filters 12.4 Summary 12.5 References Chapter 13 Advanced Packaging of RF MEMS 13.1 Introduction 13.2 Zero-Level Packaging 13.2.1Chip capping 13.2.2Thin film capping 13.3 First-Level Packaging 13.4 Reliability of Packaged RF MEMS Devices 13.5 Summary 13.6 References

9780071626231

1